RV Dump Site
1. Dump and Flush Tanks
- Take Valve cap off. Attach sewer line to connection and place other end inside of Dump Valve hole
- Briefly open gray line valve for about 4 to 5 seconds to ensure there are no leaks, then close
- Once confirmed there are no leaks open up the black water valve until black water tank is empty
- Once black water tank is empty, close black water valve and open up gray water tank valve to clean line and empty gray water tank, close gray water valve.
- Make sure both valves and fully closed and disconnect line, put cap back on valve and put the line away
2. Clean and Add Treatment
- Add a holding tank treatment to prevent odors and maintain a healthy environment
- Add a little water in the toilet bowels to keep seals lubricated
